Frequently Asked Questions and Solutions for iStick TC Series Mod
Today I will share with you the common problems and solutions of iStick TC series mod.
A:The Sony VTC4 or some other standard flat top 18650 batteries whose continuous discharge current is above 25A are recommended.
A:If you increase the temperature to 315 ℃, and continue to press the up button, the temperature reading will automatically change to the lowest Fahrenheit (200℉). Equally, if the temperature is set at the lowest Fahrenheit (200℉) and you continue to press the down button, the temperature reading will automatically change to the highest Celsius (315 ℃).
A: The iStick TC40W and iStick TC60W can't be upgraded.
The iStick TC100W, iStick Pico and iStick TC200W are upgradeable.
A:Please check the atomizer head you use.
If you use Kanthal coil under TC mode, the device will jump to VW mode.
When using TC mode, please use Ni 200/ Ti/SS and other Temp control coils in the atomizer.
A:Firstly, please be sure the atomizer head is installed when it is at the room temperature.
Secondly, please adjust the setting to have a try. The recommended temperature for Ni head is from 500-550℉, for Ti head is from 450-500℉.
At last, you can change the atomizer head to try it.
A: Please check the type of the battery you use, and be sure continuous discharge current of the cell is higher than 25A.
1.Which kind of battery can I use in iStick TC60W, iStick TC100W, iStick Pico and iStick TC200W？
A:The Sony VTC4 or some other standard flat top 18650 batteries whose continuous discharge current is above 25A are recommended.
2.How to Shift between ℃ and ℉ when we use iStick TC series products?
A:If you increase the temperature to 315 ℃, and continue to press the up button, the temperature reading will automatically change to the lowest Fahrenheit (200℉). Equally, if the temperature is set at the lowest Fahrenheit (200℉) and you continue to press the down button, the temperature reading will automatically change to the highest Celsius (315 ℃).
3. Can my iStick TC40W and iStick TC60W be upgraded?
A: The iStick TC40W and iStick TC60W can't be upgraded.
The iStick TC100W, iStick Pico and iStick TC200W are upgradeable.
4. When I use TC mode, why the device switch to VW mode?
A:Please check the atomizer head you use.
If you use Kanthal coil under TC mode, the device will jump to VW mode.
When using TC mode, please use Ni 200/ Ti/SS and other Temp control coils in the atomizer.
5. When I use TC mode, why the device will display 'temperature protection' all the time?
A:Firstly, please be sure the atomizer head is installed when it is at the room temperature.
Secondly, please adjust the setting to have a try. The recommended temperature for Ni head is from 500-550℉, for Ti head is from 450-500℉.
At last, you can change the atomizer head to try it.
6. Why does the device(iStick TC60W, iStick TC100W, iStick Pico and iStick TC200W ) display "low battery" when the battery cell is fully charged?
A: Please check the type of the battery you use, and be sure continuous discharge current of the cell is higher than 25A.
Post A Comment
No comments :