Do You Know How To Use Aegis legend Mod?

1.Turn On: Press the fire button 5 times in quick succession to turn On the device.

2.Turn Off: Press the fire button 5 times in quick succession to turn OFF the device.

3.Mode Selection: Press the fire button 3 times in quick succession to enter the mode selection screen.

4.Switch between working modes: In the mode selection screen, use the + & - button to toggle between the modes and press and hold the fire button for 0.8s for allow 5s of inactivity to select.

5.TCR Mode: On the mode selection screen toggle to TC-TCR, press and hold the fire button to enter the mode, use + & - button to adjust the TCR value.

6.VPC Mode: On the mode selection screen toggle to VPC, press and hold the fire button to enter the VPC mode. Press the Fire button and use the + & - button to set the values of P1/P2/P3/P4/P5.

7.Resistance and Puffs reset: Enter the setting state. Press the Fire button to toggle the cursor to the COIL or PUFF. Press + to reset the COIL or PUFF value.

8.Screen lock: Press the + & - button simultaneously to lock and unlock the screen.

9.Display brightness adjustment: Press and hold the Fire & + or - button simultaneously to adjust the brightness of the display.

10.Stealth mode: Press the Fire, the ‘+’ and the ‘-’ keys simultaneously for 2 seconds to enter the Stealth mode. The same operation to exit stealth mode. In Stealth mode, you can only vape or shut down.

11.USB upgrade: Remove the atomizer and battery, press and hold ”+” key while inserting in the USB to a PC, perform an upgrade on the PC using the Geekvape firmware upgrade software.

12.USB Charging: Connect USB to a power source to charge batteries, battery icon will begin to animate and stop once fully charged.

13.Display Colors: In mode selection screen, press the “+” and “-” keys simultaneously for 1 second to switch between display colors.

Newer Post Older Post